Out Of Stock

Spuhr ISMS 34mm Quick Detach Unimount

$36900

Details: Like-New Spuhr ISMS (Ideal Scope Mount System). Model QDP-4002. Scope mount Picatinny. Ring Size 34mm. 0 Mil / 0 MOA cant. 1.5” in height. Includes original box, manual, and leveling wedge.

Spuhr’s Description:
Ideal Scope Mount System

Extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides an unobstructed view of the knobs.

Durability

Prevents damage to the scope due to flexing during heavy recoil or rough handling. The sniper’s rifle and the spotter’s carbine can have the same mount, enabling the use of the same or shared equipment and accessories.

Scope rotation

Innovative solution for indexing the rotation of the scope, using the included tool/gauge to index the scope correctly to the mount and gun. This is very important since if the scope is not properly indexed there will be an unintended lateral shift of the point of impact whenever the elevation is adjusted.

Mounting placements

Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don’t want your barrel to touch the forend, you don’t want the sights to be mounted on the forend. Our mounting system has up to seven interfaces for accessories, and the laser can easily be attached to the scope mount, providing the advantage of an undisturbed laser and having the weight close to the center of the gun instead of forward.

Tilt

Mounts can be delivered in various tilts. The tilt is engraved on the mount, in both MIL and MOA.

Accessible and readable dials

The rings are cut at 45 degrees instead of horizontally, providing several advantages; the screws holding the parts together are not obscuring the knobs, thus the shooter can quickly determine the settings of the knobs. It also gives the shooter a horizontal reference line helping the shooter subconsciously to avoid canting the rifle to the side.

The rings have index marks on the top and right sides, making low knobs more easily readable.

Accessories

Provides use of various accessories such as angle cosine indicator (ACI), backup sights, lasers, illuminators, night vision mounts, etc. with a minimized ”footprint”. With traditional mounts, this can only be achieved if there is sufficient space on the middle tube for additional rings, which there rarely is. The ”Ideal Scope Mount System”™ has interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces. A selection of interfaces for popular accessories are available, and others can be made to customer specifications.

Level

The sight mount has a level included in the rear of the mount.

RKB Armory’s Opinion: This is the ultimate in sturdy precision. It even has a leveling wedge, built-in level, and Quick-Detach capability.

Out of stock

Email me when this is back in stock!



Category: Product ID: 11624

Description

Details: Like-New Spuhr ISMS (Ideal Scope Mount System). Model QDP-4002. Scope mount Picatinny. Ring Size 34mm. 0 Mil / 0 MOA cant. 1.5” in height. Includes original box, manual, and leveling wedge.

Spuhr’s Description:
Ideal Scope Mount System

Extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides an unobstructed view of the knobs.

Durability

Prevents damage to the scope due to flexing during heavy recoil or rough handling. The sniper’s rifle and the spotter’s carbine can have the same mount, enabling the use of the same or shared equipment and accessories.

Scope rotation

Innovative solution for indexing the rotation of the scope, using the included tool/gauge to index the scope correctly to the mount and gun. This is very important since if the scope is not properly indexed there will be an unintended lateral shift of the point of impact whenever the elevation is adjusted.

Mounting placements

Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don’t want your barrel to touch the forend, you don’t want the sights to be mounted on the forend. Our mounting system has up to seven interfaces for accessories, and the laser can easily be attached to the scope mount, providing the advantage of an undisturbed laser and having the weight close to the center of the gun instead of forward.

Tilt

Mounts can be delivered in various tilts. The tilt is engraved on the mount, in both MIL and MOA.

Accessible and readable dials

The rings are cut at 45 degrees instead of horizontally, providing several advantages; the screws holding the parts together are not obscuring the knobs, thus the shooter can quickly determine the settings of the knobs. It also gives the shooter a horizontal reference line helping the shooter subconsciously to avoid canting the rifle to the side.

The rings have index marks on the top and right sides, making low knobs more easily readable.

Accessories

Provides use of various accessories such as angle cosine indicator (ACI), backup sights, lasers, illuminators, night vision mounts, etc. with a minimized ”footprint”. With traditional mounts, this can only be achieved if there is sufficient space on the middle tube for additional rings, which there rarely is. The ”Ideal Scope Mount System”™ has interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces. A selection of interfaces for popular accessories are available, and others can be made to customer specifications.

Level

The sight mount has a level included in the rear of the mount.

RKB Armory’s Opinion: This is the ultimate in sturdy precision. It even has a leveling wedge, built-in level, and Quick-Detach capability.

Additional information

Weight 14 oz
Dimensions 7 × 3 × 5 in

You may also like…

Minimum 4 characters